Skip to main content

EVALUATION PARAMETERS OF TABLETS

Evaluation of tablets 
Notes on tablets II
Tablets are evaluated for their physical, chemical and bioavailability properties. Stability testing is also an important evaluation parameter.

Theset are divided into official and unofficial tests.

Unofficial tests:
1. Appearance
2. Size and shape
3. Organoleptic properties (color, odor, taste)
4. Hardness
5. Friability

Official tests:
1. Drug content
2. Weight variation
3. Disintegration
4. Dissolution


Let's see important parameters in all the test (from GPAT point of view):

  • Measurement of crown thickness: Instruments used are Micrometer and Caliper scale.
  • Tablet thickness values variations: ±5% variation of a std value.

  • Instruments used for color evaluation:
  1. Reflectance spectrophotometry
  2. Tristimulus colorimetric measurements
  3. Microreflectance photometer (measure the color uniformity and gloss on a tablet surface)

  • Hardness and Friability
Hardness: tablet crushing strength
  1. Monsanto tester: Two plungers and a barrel containing compressible spring (manual tester)
  2. Strong-Cobb tester: Use of hydraulic pressure (manual pump).  An anvil+ stationary platform. Plunger activation by pumping a lever arm.
  3. Modified Strong-Cobb tester: force applied by air pressure.
  4. Pfizer tester: Holding anvil+piston. Piston is connected to a direct force reading gauge. Rapid measurement and simplicity.
  5. Erweka tester: Upper anvil is a test anvil. Motor driven suspended weight moves along a rail, uniformly transmits pressure on tablet placed between upper and lower anvils.  Pointer on scale shows breaking strength in kilograms (Kg).
  6. Schleuniger tester: Operates in horizontal position. Anvil is driven by electric motor. Reading is shown in kilograms and Strong-Cobb unit.

Friability: Instrument used is known as Roche friabilator
  1. Rotations per minute :25
  2. Operated for : 100 revolutions
  3. Time : approx. 4 min.
  4. Acceptable range: less than 0.5 to 1%.

Tablet friability is influenced by-
1. Use of concave and deep concave punches
2. Moisture content of granules and tablets (optimum moisture concentration is 2-4%)

Rough handling tests:
  • Drop test
  • Inclined plane impact test
  • Vibration test
  • Actual transportation and then testing

  • Weight variation-  
Weight variation tolerance for uncoated tablets (USP)
Weight variation test for uncoated tablets - gpat 360 blog



DISINTEGRATION
Disintegration is the breakdown of tablet into smaller particles or granules.

Disintegration apparatus consists of : Six glass tubes (3 inches long) open at the top. Tubes are held against 10-mesh screen at the bottom end. This is fitted in basket rack assembly. 
Basket rack is positioned in a beaker of fluid (1L).
Media - Water, Simulated gastric fluid or simulated intestinal fluid.
Temperature- 37±2°C.
Distance of 2.5 cm is maintained from surface of liquid and bottom of the beaker during upward and downward movement.
Frequency of movement : 28-32 cycles per minute.
As per USP standards- The tablet must disintegrate and all particles must pass through the 10-mesh screen in the time specified.


details on disintegration tests of different types of tablets - gpat 360 blog


DISSOLUTION
In vitro method which correlates the rate of drug absorption and the rate of drug dissolution from tablet.

Importance of this test:
It is essential to perform the dissolution test of tablet to (1) show that the rate of drug release is close as possible to 100% and (2) to show that the rate of drug release is uniform batch to batch.

Apparatus used:(USP)
Type I : Basket (Rotating basket)
Type II : Paddle (Rotating paddle)

There are certain dissolution acceptance criteria according to which tablet or a batch is considered acceptable or else rejected.

Various stages of dissolution acceptance criteria - gpat 360

Where, Q is the percentage of drug content dissolved in a given time period.





Comments

Popular posts from this blog

UV-Visible spectroscopy: Basics

Ultraviolet Spectroscopy In this anaytical technique, ultraviolet radiations are used. Wavelength ranges of radiations: Visible light : 400 - 800 nm Near UV radiations : 200 - 400 nm Far/ Vacuum UV : below 200 nm Generally, we carry out UV analysis in near UV region of radiations. PRINCIPLE : Electronic transitions When a molecule absorbs UV radiations, the electronic excitation occur where electrons go from lower to higher energy state.  Electronic excitation causes the electron to go from electron bonding orbital to antibonding orbital. After some time electron returns to its original state (stable). While returning to its stable form (into bonding orbital) it releases excess energy. That energy is measured by the detector to access the wavelength (λmax) /absorption pattern. TRANSITIONS: σ → σ* (126-135 nm) n → σ* (180-200 nm) π → π* n → π* ALLOWED TRANSITION:  π → π* FORBIDDEN TRANSITIONS:    n → π* ENERGY OF VARIOUS TRANSITIONS: σ

TABLETS

    Short notes on tablets I In this first article on tablets I am going to provide some important points regarding tablet formulation.   ü   I : Advantages, disadvantages, tablet defects and the excipients used in the formulation of tablets ü   II : Evaluationparameters and types & classes of tablets . Second part of this topic will be provided in the next post. So, for short notes on second point please refer the next post. Let’s start with the first point in this topic. ADVANTAGES OF TABLETS Oral route of administration is the most preferred route for the administration of drugs for their systemic effects. Tablets are mostly preferred for this due to following advantages: ·          Unit dosage forms ·          Greatest dose precision ·          Least content variability ·          Lowest cost ·          The lightest and the most compact oral dosage forms ·          Easy transportation as compared to liquids ·          Product identification is easy

Linctuses: Monophasic Liquid Dosage Form

  LINCTUSES What is a Linctus? Linctuses are sweet, viscous liquid oral preparations containing medicinal substances which have demulscent, expectorant or sedative properties. These contain high proportions of syrup and glycerin which exert demulscent effect on the mucous membrane of throat. In order to obtain prolonged local action, linctuses should be administered slowly in undiluted form. Formulation of Linctus  1. Vehicle : Syrups are mostly used as vehicles in the linctuses. Tolu syrup is preferred in cough preparations due to its aromatic odor and flavour. Glycerol syrup and invert syrup are also used as vehicles. Linctus preparation for diabetic patients contain sorbitol syrup (vehicle). Medicament is first dissolved in little amount of water and then added into vehicle. Syrups are viscous and contain less amount of water, this limits (affects) the dissolution of medicament in syrup. 2. Additives: Colouring agents : Amaranth, Erythrosin, Tartrazine. Flavouring agents : Lemon syr